PurifyMywater.com

EWTS Automatic Non-Chemical Iron Filtration Systems: FAQs

Water containing high levels of iron and manganese is common in ground water all over the Earth. If these elements remain in your water system, they can damage fixtures and appliances and cause staining of clothes and surfaces. A water softener alone is not capable of removing these stainers unless they are present in very low levels.

There are several different types of iron filters we recommend; and what may work well at one site, may not work well at another. These non-chemical iron filters operate reliably and afford very low maintenance under the right conditions. We have tested thousands of water samples, before and after the installation of our clients' systems over the years. The result is that we can offer you free, expert consulting and can guarantee that the system you need is the system you get: a custom fit for every application! E-mail or call us for more information.

Check Out These Advanced Features:

Large Capacity: Won't restrict pressure or flow, unlike cheap home club or hardware store systems.
Fully Automatic: System automatically backwashes, no filters to change.
No Chemcals to Add: Unless pH is less than 7.0; no minerals or chemicals to add; low maintenance.

For best results on well water: install system after storage holding tank where water has had chance to be exposed to air for at least 20 minutes, or install in-line air-injector between well pump and pressure tank to increase the dissolved oxygen content.

Odors? Eliminate odors first by installing ozone system or air-blowing system in holding tank. Always install iron filter after holding tank and pressure system. These systems will not remove odors, and are not designed for use on water containing hydrogen sulfide or methane gas. Not for use on chlorinated water supplies.

Typical Installation:

See more drawings on how to install iron removal systems!

Questions? E-mail Us: Purifyingmywater@aol.com